Modifica espansione di banda + CROSSBAND REPEATER per ICOM IC-24AT

[RADIOMOD]

                                 ICOM IC-24AT                         

                      EXPANDED RF/ CROSSBAND REPEATER

                   
1 REMOVE BATTERY AND ANTENNA.
2 REMOVE SCREWS AND OPEN RADIO.
3 REMOVE DIODE D8.
4 REMOVE DIODE D14 (CROSSBAND REPEATER)
5 REMOVE DIODE D13 (EXPANDED RX)
6 ATTACH DIODE DA202u TO POSITION D7
7 ATTACH DIODE DA202u TO POSITION D12. NOTE SOME MODELS REQUIRE A DA204u.
8 REASSEMBLE THE RADIO.
9 RESET THE MICROPROCESSOR. PRESS AND HOLD [LIGHT] & B 2 *#
  AND TURN POWER ON. 
 
NOTE: PRESS AND HOLD [LIGHT] & [3] AND TURN POWER ON FOR DIRECT FREQ. ENTRY.
      [ LIGHT ] & [2] WILL RESET THE RADIO FOR 10MHz INPUT OPERATION.