Modifica espansione di banda per ICOM IC-T41

[RADIOMOD]

                               ICOM IC-T41
                         
                             EXPANDED   RF

     
1- Remove battery and antenna.
2- Open the radio and locate the Logic Board.
3-Locate and remove diode D-15 (RX mode).
4-Locate and remove diode D-14 (TX mode).
5-Locate the W2 on UHF PLL board next to IC2 near board edge (board # B39219)
6-Install chip jumper position W2  (800 Rx mode).
7-Reassemble the radio.
8-(Press and hold B & # and turn power ON.

T41: 108-136 Mhz AM mode (RX only) 136-174 Mhz FM mode (RX) 440-490 Mhz TX/RX
     
T41: 400-490 Mhz