Modifica espansione di banda per ICOM IC-W21A

[RADIOMOD]

                 
                                      ICOM IC-W21A
                       
                   EXPANDED RF and ALIGNMENT CONTROL

     
1- Remove battery and antenna.
2- Remove secrews and open the case.
3- Locate logic unit board.
4- Locate position D-23 and ADD diode D23 - ( MA132WK )
5- Reassemble the radio.
6- Reset the microprocessor.(Press and hold [LIGHT] and [MONI] and turn
    the radio ON.

RANGE: 108-136 Mhz [ AM ] RX -- 136-179 Mhz [ FM ] Rx
        331-460 Mhz [ FM ] 800-945 Mhz

IC-W21A CROSS BAND
~~~~~~~~~~~~~~~~~~
          1-  Press [LIGHT] & [V/M] & TURN POWER ON
          2-  Set FREQUENCY
          3-  PRESS {FUNC]& [LIGHT] - Lock frequencies.
          4-  Turn radio OFF
          5-  PRESS - [FUNC] & [MON} & [RPT] & and turn radio ON.
          6-  CLEAR - Press [FUNC] & [LIGHT]