Modifica espansione di banda per KENWOOD TH-22

[RADIOMOD]

KENWOOD TH-22

Expanded RF 136.000 Mhz to 173.995 Mhz


1- Disconnect battery and antenna.

2- Remove 2 long screws from the rear case.

3- Remove the control knobs from the top of the radio.

4- remove the rubber top panel.

5- Separate the front and back halves. (Squeeze the bottom from panel)

6- Locate and Remove Diode D-208. ( Located on the front panel circuit
board)

7- Install the diode into location D-212. ( Diode D-210, and D-212
face the same direction ).

8- Reassemble the radio

9- Reset the microprocessor ( see OWNER manual.